archive-nl.com » NL » T » THEREBREATHERSITE.NL

Total: 405

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Alexey O2 CMF
    was replaced by cut off PVC tube 110mm diameter Counterlung inlets were sealed by brass dummy plugs similar to Franken Rig Clean view of CMF and bypass system Another clean view of CMF and bypass system Lower left input hose from O2 supply from original IDA 71U nitrox connector Vertical rectangular shaped aluminium body hand made oxygen collector Center left bolt hollow body bolt for oxygen bupassing Upper left bolt Camozzi SCO 604 1 8 kind of needle valve main part of CMF system set to deliver 1 5 l min O2 flow Lower right output hose to purge line So when pressed the black mushroom shaped button at top of photo switch O2 supply line between 1 5l min CMF and direct addition to countelung with no limitations Clean view on centerline can inlet plugs on countelung I detach purge automatics from it s hoses and use hoses to connect CMF bypass that was attached to original nitrox cylinder connector So quickly i can detach bypass and revert to original IDA 71U configuration as O2 regenerative rebreather with 2 cans All parts except O2 collector were standart industrial pneumatic parts from Camozzi Conversion was quiet cost efective all parts including hand made cost me less than 100 Device was checked in nearby lake by 30 minutes dive on up to 7 meters depth All works fine But sorry no in water photos available due to this was solo dive Water was pretty warm 12 deg C compared to 7 deg C air I use it with original VM 5 full face mask as shown at http sport freepage de cgi bin feets freepage ext 339483x434877d rewrite rsdas REB6BIG HTM Later i think to made some kind of KISS rebreather Also this summer i continue diving with my IDA 72SMG

    Original URL path: http://www.therebreathersite.nl/06_Homebuilders/Alexey_Ida71_O2_CMF.htm (2016-05-02)
    Open archived version from archive


  • Abbrings Inspiration
    old diver named diver Abbring He doesn t need Inspiration Check out the streamlined model and easy replaceable cylinders Big advantage of this system is that you always receive one euro in return when you bring it back to the

    Original URL path: http://www.therebreathersite.nl/06_Homebuilders/abbrings_inspiration.htm (2016-05-02)
    Open archived version from archive

  • Brian IDA57
    IDA 57 cheap Check out these pictures This set cost only 600 00 US Dollar Transport cost for buyer Please contact Brian for any details beechhouse bigfoot com The IDA

    Original URL path: http://www.therebreathersite.nl/06_Homebuilders/brian_ida57.htm (2016-05-02)
    Open archived version from archive

  • Karls Inspiration
    to change the whole rig Here is his report 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 I want to thank Karl Purchase for his contribution to my web If you have

    Original URL path: http://www.therebreathersite.nl/06_Homebuilders/karls_inspiration.htm (2016-05-02)
    Open archived version from archive

  • Olive green IDA 71
    connector for the flow meter The middle connector is for the O2 feed and the bottom one is used for diluent All connectors are QDs found in BCs and dry suits The ADV bypass made of ertalon The axis goes through the center of the cap pressing the ADV diaphragm to activate it The ADV bypass installed Diluent is injected in the bag by pressing on the white disc On the top right you see the exhaust hole from the CL OPV The assembled rig I used an old Buddy Commando BC that fits just perfect The ppO2 meters come out of the rig from the LHS To avoid strain on the handsets I used some Kevlar string that was cut a bit shorter than the cables This way the Kevlar stretches first taking the strain instead of pulling on the cables The two ppO2 monitors from Martin www tecme de Good quality of manufacture and reliable design The LCD backlight is on in this pic First few moments in the pool Immediate feedback everything works just great The only problem is with the mouthpiece The hose layout is meant for an FFM so in its current state this makes it very uncomfortable for long dives Testing and drills in the water Reading the ppO2 meters the rig is slightly negative and rests very well on the diver s back Testing for leeks The counter lung is visible with the two P connectors for the sensors The scrubber canister sits in the center and the O2 tank is on your right The left tank contains diluent air On the LHS sits an Apeks DS4 for DIL addition The DS4 on the RHS has been blanked off and the IP raised to 11 bar You can also see the OPV fitted

    Original URL path: http://www.therebreathersite.nl/06_Homebuilders/olive_green_ida_71.htm (2016-05-02)
    Open archived version from archive

  • Ralph Buscemi CCR
    that I wanted a back mount and closed circuit So I built this unit I have had it to 120 40meters It worked fine to that depth I used the RGU FM oxygen addition unit and a second stage for the diluent I built the oxygen display from a LED display head This wasn t going to be the final unit but I ran out of time to finish it

    Original URL path: http://www.therebreathersite.nl/06_Homebuilders/ralph_buscemi_ccr.htm (2016-05-02)
    Open archived version from archive

  • Photos Black Water Nymph
    This page shows the homemade rebreather Black Water Nymph made by Uwe Busch Please sign my Guestbook

    Original URL path: http://www.therebreathersite.nl/Zuurstofrebreathers/German/photos_black_water_nymph.htm (2016-05-02)
    Open archived version from archive

  • Titanium Box
    the ALIBOX This one was made from 4 mm aluminium and hard anodised to give it a protective layer and a nice green colour Decided to open a web site www divedesign be to see what reactions I would get and I have had a huge response I hope you like my design Here are a few pictures If there are any questions you can contact me through my website Many thanks Michael Hearn I would like to thank Michael for sharing his design with us Michael Hearn www divedesign be Kind regards Janwillem Bech 05 june 2006 Wanted to convert my INSPO to rear mounted just for the easz of it Technically it s not difficult the hardest part is to cut up your original kit to do it I decided not to do that but to buy the parts i needed to enable me to revert back to the original if necessary Here is what came up with I used an Inspiration wing 22 5 kg took out the inner bag and replaced it with the two lungs In place of the dil and Ox feeds i used 2 AP valves jacket inflation elbows with a corrugated hose onto a normal jacket inflator The low pressure hoses run down between the lung and wing and i mounted them on the inspiration harness under the weight pockets see pics This makes them very accessible and easy to operate and out of the way and gives also the possibility of purging water from the lungs The T pieces fit in to the holes where the dump valve and inflation valve were on the wing The only extra hole i had to make in the wing was for the overpressure valve The T pieces to canister hoses i shortened by 10cm

    Original URL path: http://www.therebreathersite.nl/06_Homebuilders/titanium_box.htm (2016-05-02)
    Open archived version from archive